SESS USA

You Are Viewing

A Blog Post

Why Load Notice?

201510283S2C

Why display load signs? For safety, of course. While safety and warning signs are all around us, it’s easy to forget or to be blasé, but storage equipment carries heavy loads. A typical one-tonne pallet weighs the same as a small car. If it falls from 10m high, it’s doing about 30mph by the time it hits the ground.

All suppliers provide some safety information on load notices. What’s on the display can range from just a simple list of dos and don’ts through to the full O&M manual. It’s assumed that all operational personnel are suitably trained but load notices act as timely reminders of important points. Giving specifics of a particular installation is always useful.

Back in the 1980s, recommendations made in SEMA’s Code of Practice for the Use of Static Pallet Racking comprised a maintenance notice, a warning notice and a load notice; and some older jobs will still have these displayed. Since then, a raft of documentation in terms of EC Directives and British Standards has developed both continual guidance and uniform, safety signage.

The regulations define four types of notice of specific shape and using specific colours. Still in use today, they represent; prohibition – a sign prohibiting behaviour likely to cause a risk to health or safety (e.g. no smoking); warning – a sign giving a warning of a risk to health or safety (e.g. fire risk); an information sign (such as Muster Point) and a mandatory sign prescribing behaviour (e.g. wear ear protectors).

201510283RWA

An official SEMA Load Notice intends to give main points to workers ‘on the shop floor’ as they carry out their duties. It conveys key pieces of specific information and delivers reminders of the most important safety messages. The SEMA Load Notice cannot offer every last piece of safety information. It is split into three main parts; general safety information, installation specific information and administrative information.

An important safety requirement, SEMA recommends that the Load Notice’s format conforms to the appropriate layout advised in its publication Load Notices (available from SEMA).

The provider of the Load Notice is supplying a notification of how to load the structure safely. As such, the supplier of the Load Notice is taking on a responsibility for the loading information provided on it. It’s the customer’s responsibility to ensure that the Load Notice conforms to Load Notices and that the correct SEMA logo is displayed. Re-located racking should have its loading integrity verified by either the OEM or through full traceability of the design parameters.

SEMA has spent almost half a century developing the know-how to maximise your assets in three ways; by capitalising on your building’s space to profitable advantage; through the design and installation of storage systems that are fit for purpose while preventing damage to items stored; and with the utmost respect for the health and safety of personnel.

It is the British Trade Association of the Storage Equipment Industry. It is committed to promoting and extending the safe design, installation and use of storage equipment manufactured and supplied by its members.

The SEMA logo should only be used on a Load Notice that is supplied by a SEMA Member for use on a product or system manufactured or supplied by a SEMA Member.

The SEMA Distributor Company logo is used when the Load Notice is supplied by a distributor company for a structure that is supplied by an ‘SDC’ and for use on a SEMA member’s product or system.

To prevent your work space from becoming part of a statistic, contact SESS USA to avoid this happenning to you.